$658.00
Description
For optimal filter set performance, pair this emitter with AF01-504/24 and AF521-Di01, which have been optimized for Yellow Fluorescent Protein (YFP), Venus, ATTO 488, ATTO 514, ATO 520 and other key fluorophores. Precise edge placement of the steep spectral edges combined with deep complementary blocking maximize fluorophore performance compared to standard exciter and emitter pairs.
| Optical Specifications | |
|---|---|
| Transmission Band 1 | Tavg > 93% 525.5 – 552.5 nm |
| Blocking Band 1 | ODavg > 5 200 – 275 nm (Design specification – measurements are noise-floor limited). |
| Blocking Band 2 | ODavg > 6 275 – 481 nm |
| Blocking Band 3 | ODavg > 10 481 – 516.5 nm (Design specification – measurements are noise-floor limited) |
| Blocking Band 4 | OD > 3.5 521 nm |
| Blocking Band 5 | ODavg > 6 565 – 850 nm |
| Blocking Band 6 | ODavg > 2 850 – 1100 nm |
| Center Wavelength 1 | 539 nm |
| Guaranteed Minimum Bandwidth 1 | 27 nm |
| FWHM Bandwidth 1 (nominal) | 31 nm |
| General Filter Specifications | Value |
| Angle of Incidence | 0 ± 5 degrees |
| Cone Half-angle | 7 degrees |
| Optical Damage Rating | Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs. |
| Physical Filter Specifications | |
| Transverse Dimensions (diameter) | 25 mm |
| Transverse Tolerance | + 0.0 / – 0.1 mm |
| Filter Thickness (mounted) | 3.5 mm |
| Filter Thickness Tolerance (mounted) | ± 0.1 mm |
| Clear Aperture | ≥ 22 mm |
| Scratch-Dig | 60-40 |
| Filter Thickness (unmounted) | 2.0 mm |
| Filter Thickness Tolerance (unmounted) | ± 0.1 mm |
| Filter Thickness Tolerance (unmounted) | ± 0.1 mm |
| Orientation | Arrow on ring indicates preferred direction of propagation of light |
Additional information
| Weight | 0.2 lbs |
|---|
