$658.00
Description
For optimal filter set performance, pair this exciter with AF01-592/42 and AF567-Di01, which have been optimized for Cy5, Alexa Fluor 546, ATTO 550 and other key fluorophores when used as a filter set. Precise edge placement of the steep spectral edges combined with deep complementary blocking maximize fluorophore performance compared to standard exciter and emitter pairs.
| Optical Specifications | |
|---|---|
| Transmission Band 1 | Tavg > 93% 540 – 562 nm |
| Blocking Band 1 | ODavg > 5 200 – 275 nm (Design specification – measurements are noise-floor limited). |
| Blocking Band 2 | ODavg > 5 275 – 340 nm |
| Blocking Band 3 | ODavg > 6 340 – 528 nm |
| Blocking Band 4 | OD > 3.5 566.5 nm |
| Blocking Band 5 | ODavg > 10 571 – 627 nm (Design specification – measurements are noise-floor limited) |
| Blocking Band 6 | ODavg > 6 627 – 850 nm |
| Blocking Band 7 | ODavg > 2 850 – 1100 nm |
| Center Wavelength 1 | 551 nm |
| Guaranteed Minimum Bandwidth 1 | 22 nm |
| FWHM 1 (nominal) | 27.4 nm |
| General Filter Specifications | Value |
| Angle of Incidence | 0 ± 5 degrees |
| Cone Half-angle | 7 degrees |
| Optical Damage Rating | Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs. |
| Physical Filter Specifications | |
| Transverse Dimensions (diameter) | 25 mm |
| Transverse Tolerance | + 0.0 / – 0.1 mm |
| Filter Thickness (mounted) | 5 mm |
| Filter Thickness Tolerance (mounted) | ± 0.1 mm |
| Clear Aperture | ≥ 21 mm |
| Scratch-Dig | 60-40 |
| Filter Thickness (unmounted) | 2.0 mm |
| Filter Thickness Tolerance (unmounted) | ± 0.1 mm |
| Orientation | Arrow on ring indicates preferred direction of propagation of light. |
Additional information
| Weight | 0.2 lbs |
|---|
